Primo

New Michael Harkous signature grips from Primo. The Cali Grip is made from an extra durable and grippy rubber compound that is 170mm long and 31mm in diameter. Comes with Primo Nylon Bar Ends.

-Flanges: No
-Length: 170mm
-Diameter: 31mm
-Colour: Army Green, Black, Dark Blue, Tan

New Stevie Churchill signature tyre from Primo. Stevie's signature tyre features a smooth tread pattern with Micro Knurling all over for extra traction. Available in a wide 20 x 2.45" width.

-Beading: Wire
-Width: 2.45"
-Wheel Size: 20"
-PSI: 110
-Weight: 720g (2.45")

The Primo Integrated Headset features 2 precision sealed 45x45 bearings, Alloy top cap and comes in the regular Primo colors.

-Headset Type: Integrated 45/45
-Colours: Black, Oil Slick, Polished
-Weight: 62g

Drive Side Plastic Hub Guard from Primo for their Remix Cassette Hub. Supplied with the appropriate cone nut to run the guard, this Primo DSG protects the Drive Side of your Remix Hub and slides great thanks to its Nylon construction. Replacement Nylon Guards are available separately so once you wear yours out you can replace the Nylon part separately.

-Material: Plastic
-Guard Type: Drive Side Guard
-Fitment: Primo Remix V1 CS Hub
-Weight: 55g

The Primo Stevie Integrated Headset features a 21mm tall top cap, much taller than the regular Primo Headset. It also features 2 precision sealed 45x45 bearings and all the regular bits and pieces needed to get your headset running smooth again.

Please note that the Black version of the Stevie headset comes with a slightly taller 23mm top cap.

-Headset Type: Integrated 45/45
-Colours: Black, Gold, Polished, Oil Slick, Red
-Weight: 78g

New OSS Plastic Pegs from Primo. Primo have teamed with with OSS in LA to bring you a collaboration Plastic Peg to cater for the modern street rider. Featuring a alloy inner core with Nylon outer sleeve thats available in 4.5" and 4.75" lengths. 14mm with 10mm (3/8") adapter. Each Peg comes with a single OSS Block of wax in assorted colours.

-Peg Type: Plastic Peg
-Quantity: Single
-Length: 4.5", 4.75"
-Axle: 14mm with 10mm adapter
-Colours: Black
-Weight: 195g (4.5"), 204g (4.75")

New Craig Passero's signature bar from Primo. Made from heat-treated straight gauge chromoly for extra durability. Available in 9", 9.5" and 10" Rise all featuring a 28.5" width.

-Rise: 9", 9.5", 10"
-Width: 28.5"
-Backsweep: 11º
-Up Sweep: 1º
-Colours: Black, Chrome
-Weight: 2.02lbs (9")

Lightweight, Strong and stylish, the Primo Freemix V2 utilises their lighter rim, the Balance V2 which is made from 7005 series aluminium and has been reinforced to match the demands of todays riding. The hub used is their Freemix Freecoaster which has an alloy shell, heat-treated Chromoly axle and nuts and has fully sealed bearings, This wheel also comes with rim tape and a set of hub guards.

-Wheel Size: 20"
-Wheel Type: Rear Freecoaster Wheel
-Drilling: 36 Hole
-Axle: 14mm Male
-Colours: All Black, Black with Oil Slick Hub.
-Weight: 3.1lbs

The Primo Forged Spokes are one of the strongest on the market. These 14G Spokes feature a forged construction unlike most Stainless Spokes. Great for those looking for a strong pack of spokes. Supplied in a pack of 50 with 14mm Brass Nipples.

-Material: Forged Stainless Steel
-Colours: Black, Red

Pivotal style seat post from Primo. Made from 6061 alloy this 135mm Pivotal post is available in 25.4mm diameter only. Compatible with Pivotal Seats Only.

-Post Type: Pivotal
-Post Diameter: 25.4mm
-Colours: Black
-Weight: 94g

None Drive Side Plastic Hub Guard from Primo for their Freemix Freecoaster Hub. Supplied with the appropriate cone nut to run the guard, this Primo NDSG protects the None Drive Side of your Freemix Hub and slides great thanks to its Nylon construction. Replacement Nylon Guards are available separately so once you wear yours out you can replace the Nylon part separately.

-Material: Plastic
-Guard Type: None Drive Side
-Fitment: Primo Freemix FC Hub
-Weight: 55g

Drive Side Plastic Hub Guard from Primo for their Freemix Freecoaster Hub. Supplied with the appropriate cone nut to run the guard, this Primo DSG protects the Drive Side of your Freemix Hub and slides great thanks to its Nylon construction. Replacement Nylon Guards are available separately so once you wear yours out you can replace the Nylon part separately.

-Material: Plastic
-Guard Type: Drive Side Guard
-Fitment: Primo Freemix Pro FC Hub
-Weight: 55g

The Colony Integrated Headset features 2 precision sealed campy spec 45 x 45 integrated bearings. Alloy anodised top cap with etched Colony Logo and 2 micro adjustment shims to raise the height of your top cap to suit your needs. Available is usual colour colours.

-Headset Type: Integrated 45/45
-Colours: Black, Pink, Purple, Rainbow, Red
-Weight: 55g

New from Primo is their Freemix Pro Freecoaster Hub. Using traditional KHE internals, the Primo Freemix is very similar in design to other free coasters you may have seen in the past. Using a 14mm heat treated chromoly, oversized ACB Bearing on driver side and 6061 alloy construction shell. This Pro version of the Freemix comes complete with drive side and none drive side guards as standard.

-Drilling: 36h
-Axle size: 14mm Male
-Drive side: RHD/LHD Specific
-Driver size: 9T
-Colours: Black
-Weight: 709g

Replacement Plastic Peg Sleeves for Primo Binary V2 Plastic Pegs. Available in 4" and 4.5" lengths.

-Peg Type: Replacement Plastic Sleeve
-Quantity: Single
-Length: 4", 4.5"
-Colours: Black

Long Pivotal style seat post from Primo. Made from 6061 alloy this 200mm Pivotal post is available in 25.4mm diameter only. Compatible with Pivotal Seats Only.

-Post Type: Pivotal
-Post Diameter: 25.4mm
-Colours: Black
-Weight: 206g

The new BMX rim from the guys at Primo is the Primo VS 7005 Rim. This new take on there already popular 7 series rim see's the introduction of of a new style construction. The VS rim has a V shaped I beam construction for extra strength and see's the spoke holes moved towards the outer edge of the rim and drilled through the inner wall for weight saving. This newer style BMX rim from primo is welded at the seam which is what you'd expect from Primo and is available in 36 Hole only.

-Material: Double Walled 7005 Aluminium
-Construction: Welded
-Drilling: 36 Hole
-Colours: Black
-Weight: 462g

The newer V2 version of the popular N4FL hub from Primo. As you can see it doesn't look like a normal front hub, it has no flanges to pass the spokes through. This enervative design makes the hub really unique, plus as the hub is straight laced theres no flanges to get knocked during grinds! Also the hub features 2 built in black plastic hub guards which double up as cone spacers, saving on the purchase of hub guards afterwards too.

-Drilling: 36h
-Axle size: 10mm Female
-Colours: Black
-Weight: 241g

Replacement Plastic Guard for those who have previously purchased the Primo DSG guards that came with the cone nut required. This is just the replacement plastic guard and does not come with the cone required to use on your Freemix or Remix hub.

-Material: Plastic
-Guard Type: Drive Side Guard
-Fitment: Primo Freemix Pro FC Hub / Primo Remix V1/V2 CS Hub
-Weight: 21g

Universal fit Drive Side Guard from Primo. Made from forged Aluminum the Primo DSG Guard is built to protect the drive side of your hub. Compatible with 8T, 9T and 10T drivers and suited to Male Axle Hubs only.

-Material: Aluminium
-Guard Type: Drive Side
-Fitment: Universal
-Weight: 55g

The Primo Binary V2 Plastic Pegs feature a chromoly inner core with a special custom composite Nylon outer sleeve that will slide on some surfaces that you might not be able to with normal chromoly pegs. Available in 4" and 4.5" lengths. 14mm with 10mm (3/8") adapter. Comes with additional Primo Plastic Sleeve.

-Peg Type: Plastic Peg
-Quantity: Single
-Length: 4", 4.5"
-Axle: 14mm with 10mm adapter
-Colours: Black
-Weight: 175g (4"), 195g (4.5")